Lab 8/ HW 8

By -
Lab 8 (Music w/ Arrays):
//Plays a song on a speaker
#include "pitches.h" //Header file with pitch definitions
const int SPEAKER=9; //Speaker Pin
//Note Array
int notes[] = { NOTE_A4, NOTE_E3, NOTE_A4, 0, NOTE_A4, NOTE_E3,
NOTE_A4, 0,NOTE_E4, NOTE_D4, NOTE_C4, NOTE_B4, NOTE_A4, NOTE_B4,
NOTE_C4, NOTE_D4,NOTE_E4, NOTE_E3, NOTE_A4, 0 };
//The Duration of each note (in ms)
int times[] = { 250, 250, 250, 250, 250, 250, 250, 250,
125, 125, 125, 125, 125, 125, 125, 125,
250, 250, 250, 250 };
void setup()
{
//Play each note for the right duration
for (int i = 0; i < 20; i++)
{
 tone(SPEAKER, notes[i], times[i]);
 delay(times[i]);
}
}
void loop()
{
//Press the Reset button to play again.

}



Comments

Post a Comment

Popular posts from this blog

Lab 13/ HW 13

By -
Lab 13 (LCD); //LCD with Progress Bar //Include the library code: #include <LiquidCrystal.h> #include <Wire.h> //Initialize the library with the numbers of the interface pins LiquidCrystal lcd(8, 9, 4, 5, 6, 7); int temp_address = 73; //Create the progress bar characters byte p20[8] = {   B10000,   B10000,   B10000,   B10000,   B10000,   B10000,   B10000,   B10000, }; byte p40[8] = {   B11000,   B11000,   B11000,   B11000,   B11000,   B11000,   B11000,   B11000, }; byte p60[8] = {   B11100,   B11100,   B11100,   B11100,   B11100,   B11100,   B11100,   B11100, }; byte p80[8] = {   B11110,   B11110,   B11110,   B11110,   B11110,   B11110,   B11110,   B11110, }; byte p100[8] = {   B11111,   B11111,   B11111,   B11111,   B11111,   B11111...
Read more

Lab 21/ HW 21

By -
Lab 21 (BPM180): // This is the top of the program #include <Wire.h> #include "BMP180Lib.c" #include <SD.h> #define BMP180_ADDRESS 0x77 // I2C address of BMP180 // Read 1 byte from the BMP180 at 'address' char bmp180Read(unsigned char address) {  unsigned char data;  Wire.beginTransmission(BMP180_ADDRESS);  Wire.write(address);  Wire.endTransmission();  Wire.requestFrom(BMP180_ADDRESS, 1);  while(!Wire.available())  ;  return Wire.read(); } // Read 2 bytes from the BMP180 // First byte will be from 'address' // Second byte will be from 'address'+1 int bmp180ReadInt(unsigned char address) {  unsigned char msb, lsb;  Wire.beginTransmission(BMP180_ADDRESS);  Wire.write(address);  Wire.endTransmission();  Wire.requestFrom(BMP180_ADDRESS, 2);  while(Wire.available()<2)  ;  msb = Wire.read();  lsb = Wire.read();  return (int) msb<<8 | lsb; } short temperature; long pressure; // Use...
Read more